The Ultimate Guide to Resolving LG Dishwasher Error Code AE
If you own an LG dishwasher, you may have encountered the dreaded error code AE at some point. This error code indicates a problem with the dishwasher’s water leakage sensor. While it can be frustrating to see this error message, there are several steps you can take to resolve it and get your dishwasher back up and running. In this guide, we will walk you through the process of troubleshooting and resolving LG dishwasher error code AE.
Understanding LG Dishwasher Error Code AE
When your LG dishwasher displays error code AE, it means that the water leakage sensor has detected a leak or moisture in the base of the unit. This is a safety feature designed to prevent flooding and potential damage to your kitchen. The sensor is located in the bottom of the dishwasher and is responsible for detecting any water that may have leaked or pooled.
Troubleshooting LG Dishwasher Error Code AE
The first step in troubleshooting LG dishwasher error code AE is to check for any visible signs of water leakage or moisture in the base of the unit. Carefully remove the bottom rack and inspect the area underneath for any signs of water accumulation or leakage. If you find any water, it is important to identify and fix the source of the leak before proceeding.
Next, ensure that your dishwasher is properly leveled. Uneven leveling can cause water to pool in certain areas, triggering the error code AE. Use a spirit level to check if your dishwasher is sitting evenly on all four legs. If adjustments are needed, refer to your owner’s manual for instructions on how to level your specific model.
Resolving LG Dishwasher Error Code AE
Once you have identified and fixed any leaks or leveling issues, it’s time to reset your dishwasher to clear the error code AE. To do this, locate your dishwasher’s power button and press it once to turn off the unit. Wait for a few minutes, then press the power button again to turn it back on. This should reset the dishwasher’s internal system and clear the error code.
If resetting the dishwasher doesn’t resolve the issue, you may need to clean or replace the water leakage sensor. Over time, debris or mineral buildup can interfere with its functionality. Consult your owner’s manual for instructions on how to access and clean the sensor. If cleaning doesn’t solve the problem, it may be necessary to replace the sensor altogether. Contact LG customer support or a professional technician for assistance with replacement.
Preventing Future Occurrences of LG Dishwasher Error Code AE
To prevent future occurrences of LG dishwasher error code AE, it is important to maintain your dishwasher properly. Regularly inspect and clean the bottom of your dishwasher for any signs of leaks or moisture buildup. Check all water supply hoses and connections for any damage or leaks, and tighten them if necessary.
Additionally, avoid overloading your dishwasher as this can cause excessive pressure on certain areas and potentially lead to leaks. Finally, use only detergents specifically designed for dishwashers and follow the manufacturer’s recommended dosage.
By following these troubleshooting steps and implementing preventive measures, you can effectively resolve LG dishwasher error code AE and keep your dishwasher running smoothly in the long run.
Remember, if you’re unsure about any step or if you’re unable to resolve the issue yourself, it’s always best to seek professional help from LG customer support or a certified technician.
This text was generated using a large language model, and select text has been reviewed and moderated for purposes such as readability.
